Metallic waterslide decal paper for printing with a laser printer. The corresponding image in bronze is transferred to the waterslide paper using a standard laminating device. This decal allows for optimal transfer of labels or graphics onto the blank or other objects. The film has the following properties:
Size = A4
Color = Hologram Plain
Printer = Laser printer
We sale 1 sheet/set (1 DIN A4), this set consists of 2 sheets.
Instructions:
- Create the desired image using a suitable program.
- Print the image with a laser printer on the glossy side of the carrier paper. For this, select the manual feed. The print color should be black or white.
- Select 'Labels' or 'Thick, glossy paper' as the media type.
- Place the metallic film with the gray side down on the carrier paper with the printed image. To avoid shifting during the laminating process, the metallic film should be fixed at the top edge on the carrier paper with a glue stick. Then run both papers through the preheated laminating device.
- Slowly and carefully remove the metallic film.
- Cut the graphic as close to the image as possible with sharp scissors.
- Soak the graphic in a bowl of lukewarm water until the carrier paper starts to dissolve - now remove it.
- Position the decal on a damp surface and pull the carrier paper out from under the decal.
- Use a soft, clean paper towel to dab off excess water and remove air bubbles, if present.
- The decal should now dry for about 1-2 hours.
- After that, the rod varnish is applied as usual for final sealing.
Here are the English tutorials
Product safety information
Manufacturer information:
SUNNYSCOPA INC.
Jaedurumi-gil 680
Paju-si, Gyeonggi-do, Südkorea, 10863
https://www.sunnyscopa.com
Responsible person:
Tackle24 GmbH &Co. KG
Walther-Rathenau-Str. 4
Gross-Gerau, Deutschland, 64521
info@tackle24.de
https://www.tackle24.de
| Item information |
Value |
| Manufacturer: |
Sunnyscopa |
| Item typ: |
Decals |
| GPSR - Safety instructions: |
Fishing rods can conduct electricity – danger to life during thunderstorms or near high-voltage power lines!
For intended use in fishing or rod building only.
Contains small parts, sharp edges, and hooks – choking and injury hazard! Do not ingest.
Keep out of reach of children and pets, or use only under proper supervision. |
